When Nozzle clogged after cleaning
4-20
5
Set an ink cartridge to the ink station.
• When the ink cartridge is set, filling is automatically
started.
• Upon the ink station, the inserting location is allocated for
each ink color. Set the ink cartridge according to the car-
tridge label under the ink station.
6
It returns to the local mode when the ink
filling is completed.
If ink is not filled in step 5
If [INK NEAR END], [INK END] or other ink errors occur, it does not start ink filling.
If ink filling is not started in step 5
(1) Press the key to go back to the display of step 2.
(2) Press the key to check the state of the ink cartridge.
(3) Solve an ink error or others ( P.5-5), operate from step 2 again.
• If blurring or missing is found in printing after initial fill of ink, “Head cleaning” ( P.2-17) or
“Filling up ink” ( P.4-16) .
Se t : Sb - 4co l o r I nk
- -B- Y-KK
The front side
4 colors model:
6 colors model:
<LOCAL . 1> [ #01 ]
width:****mm
To Next Page
Loading...
