Switch Setting of Ink Supply Path
3-39
3
Convenient use
When both ink cartridge and MBIS are used
When both an ink cartridge and the optional bulk ink system (MBIS) are set in the supply paths of the same
color for 4-color ink set, you can select the ink to be used first.
1
Press the key in the LOCAL or the
REMOTE mode.
2
Press the key.
3
Press the key to set the
supply path and the ink to be used first.
Select the supply path : Press the key.
Select the ink to be used first : Press the key.
4
Press the key.
• It enters in the LOCAL or the REMOTE mode.
• Usually, when both an ink cartridge and the bulk ink system (MBIS) are set in the supply path
of the same color, the ink in the bulk ink system (MBIS) is used first.
• This setting is only available for 4-color set.
• If supply path does not have both ink cartridge and the bulk ink system (MBIS), this function
cannot be set.
• Pull out the ink cartridge selected on this function or turn the power on again to disable the
setting.
Sb - I NK MMBBYYKK
REMAIN 34567899
BULK / CART SELECT
-
C
BB
Displays the currently supplying ink.
B : Bulk ink system (MBIS)
C: Ink cartridge
- : Only one type is set
To Next Page
Loading...
