Chapter 4 Maintenance
4-14
Filling with ink
Supplies ink to alleviate nozzle clogging.
1
With the screen in local mode, select
[MENU] > [MAINTENANCE], and then press
the [ENTER] key.
• The Maintenance menu is displayed.
2
Select [FILL UP INK] and press the
[ENTER] key.
3
Selecting the type of filling.
• NORMAL : When head cleaning did not
restore normal operation, or when dropouts occur
after initial filling
• HARD : When the damper is empty, such
as when it is replaced.
4
Press the [ENTER] key.
• Ink is supplied automatically.
To Next Page
Loading...
