MIMAKI TxF150-75 - Recovering from Frequent Nozzle Dropout and Nozzle Ejection Failures of White; Recovering from Frequent Nozzle Dropout and Noz- Zle Ejection Failures of White

4-21
1
2
2
4
5
6
Chapter 4 Maintenance
Recovering from frequent nozzle dropout and nozzle ejection failures of white
1. Routine maintenance
 Clean the areas described in this manual.
2. Perform head cleaning (normal/hard)
 If the nozzle dropout does not recover after repeating the normal cleaning
several times, perform the hard cleaning.
Check results of test printing
If this does not alleviate nozzle clogging or other
issues
3. Perfome white maintenance
 Perform white maintenance if cleaning does not recover.
Check results of test printing