Chapter 6 Appendix
6-3
2
2
2
6
Compliance with standards
1) VCCI class A
2) FCC class A
3) IEC 62368-1 ETL compliance
4) CE marking (EMC Directive, Low Voltage Directive, Machinery
Directive, RoHS Directive)
5) CB Report
6) REACH and Energy Star
7) RCM
8) KC
Power supply
(100 to 120 V/ AC200 to 240 V AC)
50/60Hz ±1Hz
Manual input switching
Remote switching
function available
Sleep function avail-
able
Inlet1: control + heater
Power con-
sumption
Maximum
Not exceeding AC100-120V：900W, AC200-240V：1200W
Including the main
unit and heater
Excluding options
Minimum
Not exceeding AC100-120V：5.9W, AC200-240V：5.9W（Sleep
mode）
Installation
environment
Operating
temp.
20–30°C
In an environment
outside the range
shown on the left, the
ink ejection stability
may deteriorate.
Relative humid-
ity
35–65% RH (no condensation)
Temp. range for
guaranteed
accuracy
20–25°C (68–77°F)
Temp. gradient ±10°C/h or less (±50°F/h or less)
Dust 0.15 mg/m3 (typical office)
Maximum
operating
altitude
2,000m
Weight
Main unit: 126 kg
Packing; 180kg
Dimensions (W x D x H) 1,965 mm × 700 mm × 1,392 mm
Item TxF150-75 Remarks
To Next Page
