A5/A3™ Service Manual 046-001141-00 6 - 27
Repair and Disassembly Disassemble the Assemblies
3. Remove the two screws on the common gas outlet assembly to remove the assembly.
FIGURE 6-48
6.2.3.9 Remove the Cylinder Bracket Assembly
1. Open the service door and refer to“Open the Service Door” on page 6-3..
2. Remove the rear panel and refer to “Remove the Rear Panel Assembly” on page 6-21..
3. Unplug the tubes from the cylinder bracket assembly.
4. Remove the copper pipe from cylinder bracket assembly.
5. Remove the four screws on the cylinder bracket to remove the assembly.
FIGURE 6-49
6. Unscrew the four screws on the cylinder bracket to remove O2, N2O and AIR cylinder bracket
assemblies.
FIGURE 6-50
To Next Page
Loading...
