Cleaning and Disinfection Maintenance
9 - 12 Operator’s Manual of Anesthesia System
Figure 9-2 Remove the breathing tubes
9.7.3.1.2 Manual Bag
NOTE: Do not reuse, reprocess, or sterilize disposable products.
Directly draw out the manual bag to disassemble it.
Figure 9-3 Remove the manual bag
9.7.3.1.3 O
2
Sensor
1. Press the O
2
sensor cover switch to open the O
2
sensor cover.
Figure 9-4 Open the O
2
sensor cover
2. Pull straight out the O
2
sensor cable from the O
2
sensor support.
Breathing tubes
Breathing tubes
Oxygen sensor cover switch
To Next Page
Loading...
