Mindray A8 - Page 199

Operator’s Manual of Anesthesia System 9 - 13
Maintenance Cleaning and Disinfection
Figure 9-5 Remove the O
2
sensor cable
3. Press the buckle to pull out the O
2
sensor support from the breathing system..
Figure 9-6 Remove the O
2
sensor support from the breathing system
4. Rotate the O
2
sensor anticlockwise to remove it from the support.
Figure 9-7 Remove the O
2
sensor from the support
5. Close the O
2
sensor cover.
Oxygen sensor cable
O
2
sensor
O
2
sensor support