Operating Your Analyzer
6-10
Figure 6-6 Entering all sample information
Entering sample ID
ENTER the ID number in the “ID” box. If you have the bar-code scanner installed, you can
simple scan the sample ID into the analyzer.
Selecting patient gender
SELECT
the desired item from the “ Gender” pull-down list
,
as
Figure 6-7 shows. Note
that you can select blank in case you are not aware of the patient gender.
Figure 6-7 How to select the patient gender
Entering the patient name
ENTER the patient name into the “Name” box.
To Next Page
Loading...
