Operating Your Analyzer
6-11
Entering the patient age
This analyzer provides three ways for you to enter the patient age – in years, in months and
in days. The first way is designed for the adult or pediatric patients no younger than one year;
the second for the infant patients one month to one year; the third for the neonatal patients no
older than 28 days. You can choose only one of the three ways to enter the patient age.
To enter the patient age in years：ENTER the desired number, an integer from 0 to 200, into
the “Years” box.
To enter the patient age in months：ENTER
the desired number, an integer from 0 to 12, into
the “Months” box.
To enter the patient age in days：ENTER the desired number, an integer from 0 to 31, into the
“Days” box.
Entering the chart number
ENTER
the number of the patient’s medical chart into the “Chart No.” box.
Entering the bed number
ENTER
the number of the patient’s bed into the “Bed No.” box.
Entering the department name
You can either directly ENTER the name of the department, from which the sample came,
into the “Department” box or SELECT the desired department from the “Department”
pull-down list (if there are previously saved departments in the list, as
Figure 6-8 shows).
Figure 6-8 How to select department name from the pull-down list
To Next Page
Loading...
