Operating Your Analyzer
6-13
“Cancel” button
If you do not want to save the entered information, CLICK
the “Cancel” button to return to
the ”Count” screen without saving the changes.
ID Only
At the ”Count” screen, press [ID] and an ID window will pop up, as Figure 6-10 shows.
Figure 6-10 ID window
ENTER
the sample ID into the ID box and press [ENTER] to save the changes and close the
window. If you have the bar-code scanner installed, you can simply scan the sample ID into
the analyzer.
z If you intend to do the background check instead of a patient sample,
ENTER “0” into the “ID” box.
6.6.2 Running the samples
z Samples, controls, calibrators and waste are potentially infectious. Wear
proper personal protective equipment (e.g. gloves, lab coat, etc.) and follow
safe laboratory procedures when handling them in the laboratory.
z The sample probe tip is sharp and may contain biohazardous materials.
Exercise caution to avoid contact with the probe when working around it.
z Do not re-use such disposable product as collection tubes, test tubes,
capillary tubes, etc.
To Next Page
Loading...
