Reviewing Sample Results
7-3
Figure7-2 “Sample Table”screen
Browsing sample results
Press [←] or [→] to browse the preceding or following sample result; press [PgUp] or [PgDn]
to browse the preceding or following screen.
Switching to the “Sample Histogram Review” mode
If you are interested in reviewing the histograms of the current sample result, press [6] to
switch to the ”Sample Histogram Review” mode. To switch back to the “Sample Table
Review” mode, press [6] again.
Jumping to a sample result with known location
Press [1] and a “Goto” window will pop up, as Figure7-3 shows.
Figure7-3 “Goto” window
ENTER the location into the “Location” box and press [ENTER] to jump to the desired
sample result.
To Next Page
Loading...
