Reviewing Sample Results
7-4
Jumping to a sample result with known sample ID
Press [2] and a “Find” window will pop up, as Figure7-4 shows.
Figure7-4 “Find”window
ENTER the sample ID into the “ID” box and press [↑] to search backward or [↓] to search
forward. If the desired sample result is found, the analyzer will jump to it; if not, a message
box will pop up, as Figure7-5 shows. Press [ENTER] to close the message box.
Figure7-5 A “Result”message box
Selecting/deselecting sample results
You can select certain interested samples for transmission or printing.
Selecting/deselecting a sample result
Press [←] or [→] to move the cursor to the interested sample result and press [ENTER] to
select it. The selected sample result will be marked with a “*”, as sample “75” in Figure7-6
shows.
To Next Page
Loading...
