Mindray BC-3000 Plus - Page 139

Reviewing Sample Results
7-5
Figure7-6 Selecting a sample result
Press [ENTER] again to deselect the sample result. Once the sample is deselected, the “*”
will disappear, as sample “75” in Figure7-7 shows.
Figure7-7 Deselecting a sample result
 Selecting/deselecting multiple sample results
Example1：To select the sample results of locations 1 – 5 (sample ID:75, 77, 78, 84, 95 in
Figure7-8), follow the procedure below to do so:
1. Press[3] to enter the “Select” window, as Figure7-8 shows;