Reviewing Sample Results
7-6
Figure7-8 Entering the “Select” window
2. ENTER the start position (“1”) into the “Start” box;
3. ENTER the start position (“5”) into the “End” box;
4. CLICK “Select” and the lower left corner of the “Select” window will display “Results
selected”, as Figure7-9 shows;
Figure7-9 Selecting sample results of locations 1- 5
5. CLICK “Quit” to return to the “Sample Table Review” screen. The selected sample
results will be marked with “*”, as Figure7-10 shows.
To Next Page
Loading...
