Reviewing Sample Results
7-13
Histogram Review” mode, press [6] again.
Jumping to a sample result with known location
Press [1] and a “Goto” window will pop up, as Figure7-21 shows.
Figure7-21 “Goto” window
ENTER the location into the “Location” box and press [ENTER] to jump to the desired
sample result.
Editing sample information
Press [F1] to edit the sample information, Figure7-22 shows.
Figure7-22 Editing sample information
ID
You cannot edit the sample ID of an analyzed sample.
Selecting patient gender
SELECT
the desired item from the “Gender” pull-down list. Note that you can select blank
in case you are not aware of the patient gender.
To Next Page
Loading...
