Reviewing Sample Results
7-18
in case you are not aware of the patient gender.
Entering the department name
You can either directly ENTER the name of the department, from which the sample came,
into the “Department” box or SELECT the desired department from the “Department”
pull-down list (if there are previously saved departments in the list).
Entering sample ID
ENTER the ID number into the “ID” box.
Entering bed number
ENTER the number of the patient’s bed into the “Bed No.” box.
Entering the chart number
ENTER the number of the patient’s medical chart into the “Chart No.” box.
Entering the start and end date
ENTER the start date into the “Start” box; ENTER the end date into the “End” box.
CLICK
“Enter” to start the search. The analyzer will search the saved sample results for
matches and report the conclusion, as Figure7-29 shows. CLICK “Enter” to return to the
“Sample Table Review”screen.
Figure7-29 Reporting conclusion of the search
To Next Page
Loading...
