Reviewing Sample Results
7-19
7.3.2 Reviewing Search Result in the “Search Table Review”
Mode
z For every search, the analyzer can display maximum 500 matches.
z The matches will be deleted if you have run another sample (including
background check), or deleted a sample result, or restarted the analyzer
after the search.
Entering the “Sample Table Review” screen
Press [MENU] to enter the system menu. SELECT “Review → Search Review → Search
Table Review” (Figure7-30), to enter the “Search Table Review” screen (Figure7-31).
Figure7-30 System menu
The sample results are sequentially displayed on the screen, the earliest on the utmost left.
The “Location/Total” displayed in the lower right corner of the screen indicates the location
of the current sample result (the one whose “ID” is backlit) and the total number of the sample
results matching the search conditions.
To Next Page
Loading...
