Using the QC Programs
8-21
z If the analyzer detects WBC/RBC clogging or bubbles during the analysis,
the corresponding error messages will be displayed in the upper left corner
of the screen and the results of all the related parameters will be invalidated.
See Chapter 11 Troubleshooting for solutions.
z If the ambient temperature is outside the specified operating range, the
analyzer will alarm you for abnormal ambient temperature and the analysis
results may be unreliable. See Chapter 11 Troubleshooting for solutions.
Browsing results of other
X
analyses
To browse the result of the preceding or following
X
analyses, press [PgUp] or [PgDn].
Deleting results
X
analyses
To delete the current result, press [DEL] and a message box will pop up, as Figure 8-25
shows. CLICK “Enter” to confirm the deletion; CLICK “Cancel” to abort the deletion.
Figure 8-25 A message box to confirm the deletion
Printing
X
analysis results
Press [PRINT] to print out the current
X
analysis result by the printer.
Exiting the “
X
Count” screen
Press [MENU] to exit to the system menu, or press [MAIN] to exit to the “Count” screen.
To Next Page
Loading...
