Using the Calibration Programs
9-4
It is recommended that you create a log table for your analyzer. This log table should contain
all necessary information that is pertinent to your analyzer. Suggested items that you may
want to include in the log table are:
Calibration date
Supplier of calibrator
Lot number
Expected results and limits
Result of background check.
Enter the administrator password instructed in Chapter 5.4.1 and then choose one or several
parameters among WBC, RBC, HGB, MCV and PLT for calibration.
9.3.2 “Auto Calibration” Program
Press [MENU] to enter the system menu.
Figure9-1 System menu
SELECT “Calibration→ Auto Calibration” (Figure9-1) to enter the “Auto Calibration”
screen (Figure9-2).
To Next Page
Loading...
