Mindray BC-3000 Plus - Page 293

Troubleshooting Your Analyzer
11-15
Printer out of
paper
Printer paper running out or
not properly installed.
1. Check if there is printer paper;
2. Check if the printer paper is well
installed.
Recorder out of
paper
Recorder paper running out
or not properly installed.
1. Check if the recorder paper has run
out. If so, install the paper as
instructed by Chapter 4.4.3;
2. Check if the recorder paper is
properly installed. If not, re-install
the paper as instructed by Chapter
4.4.3;
3. If the problem remains, contact
Mindray customer service
department or your local distributor.
Recorder too Hot Recorder head too hot. Stop using the recorder. If the problem
repeats, contact Mindray customer
service department.
Press Bar Up Tension lever not replaced.
1. Press the tension lever as
instructed in Chapter 4.4.3;
2. If the problem remains, contact
Mindray customer service
department or your local distributor.
11.3.7 Ambient temperature error
Error Message Possible Cause(s) Recommended Action
Ambient Temp.
Abnormal
Abnormal ambient
temperature or temperature
transducer error.
1. Enter the “Service → System
Status” screen to check the
ambient temperature;
2. If the actual ambient exceeds the
pre-defined ambient temperature,
adjust the temperature. Otherwise,
the analysis results may be