Appendices
C-3
C.3 Cautions
z Installation by personnel not authorized or trained by Mindray may damage
your analyzer. Do not install your analyzer without the presence of
Mindray-authorized personnel.
z Liquid ingression may damage the analyzer. Do not place any bottles on the
analyzer.
z Do not connect or disconnect the printer, bar-code scanner or keyboard
when the anlazyer is on.
z Improper installation of recorder paper may jam the paper and/or result in
blank printouts.
z Do not re-use disposable products.
z When dispensing or aspirating liquids, remove the bottle or tube away only
after the sample probe is out of it.
z Do not perform any maintenance procedures that are not described in this
chapter. Performing unauthorized maintenance procedures can damage
your analyzer.
z In case of problems not specified in this manual, contact Mindray customer
service department or your local distributor for assistance.
z Only Mindray-supplied parts can be used for maintenance. For any
questions, contact Mindray customer service department or your local
distributor.
To Next Page
Loading...
