Mindray BC-3000 Plus - Page 65

Installing Your Analyzer
4-13
4.4.3 Installing Recorder Paper
Follow the procedure below to install the recorder paper.
z Improper installation of recorder paper may jam the paper and/or result in
blank printouts.
1. Locate the projecting part in the upper right corner of the recorder and press it in the
direction shown in Figure 4-11 to open it;
Figure 4-11
2. Flip the paper tension lever on the left side upwards. Keep the printing side face-down.
Insert the pointed end of the paper into the slot below the paper rod and push the paper
until it comes out from above the rod. Pull the paper out. Keep the paper centered and
place the paper into the paper holder. See Figure 4-12;