Customizing the Analyzer Software
5-15
5.5.2 Selecting baud rate
Five baud rate options are available: “19200”, “9600”(default), “4800”, “2400” and “1200”. To
select the desired baud rate, SELECT the desired rate from the “Baud Rate”pull-down list,
as Figure 5-19 shows.
Figure 5-19 Selecting baud rate
5.5.3 Selecting parity
Three parity options are available: “Odd”, “Even” and “None” (default). To select the desired
option, SELECT the desired rate from the “Parity”pull-down list, as Figure 5-20 shows.
To Next Page
Loading...
