Mindray BeneFusion eSP Vet - Using the Touchscreen

2 - 8
2.4.4 Using the Touchscreen
You can use the touchscreen to select a screen element by pressing directly on the
pump’s screen.
To avoid misuse, the touchscreen is locked automatically if no operation is detected in
the preset time. To manually lock the touchscreen, swipe the touchscreen from top
down, and select Lock.
To unlock the touchscreen, touch anywhere on the touchscreen and swipe the slide as
instructed.
NOTE
• Wipe off any water on the touchscreen in case of rain or water spray.
Standby Enters
Standby.
Purge Initiate a
purge.
Volume Enters the
Volume
menu.
Menu Enters the
Menu.
Exit Returns to the
main screen.
Bolus
Initiate a
Bolus
infusion.
Start Starts an
infusion.
Stop Pause an
infusion.
Back Returns to the
previous
screen or the
parameter
setup screen.
Home Returns to the
main screen.
Setup Enters the
Standby
Time setup
menu or the
parameter
setup screen.
Cancel Cancels the
shutdown
and returns to
the main
screen.
Turn Off Turn off the
pump.
Standby Enters
Standby.
Symbol Label Function Symbol Label Function