11 - 2
11.4 System Calibration
11.5 Network Setup
11.5.1 The WLAN Settings
11.5.2 The WLAN IP Settings
Menu Item Default Setting Function
Accuracy
Calibration
/ Contact your service personnel to perform the
calibration as per the recommended frequency in
12.2 Maintenance and Testing Schedule.
Pressure
Calibration
/ Contact your service personnel to perform the
calibration as per the recommended frequency in
12.2 Maintenance and Testing Schedule.
Data Review / Reviews the calibration data.
Menu Item Default Setting Function
SSID / /
Password / /
Security Open Selects the security method.
WLAN Setup WLAN Band
2.4GHz
Sets the WLAN band.
Menu Item Default Setting Function
DHCP Switch
On Selects whether to enable the function of
automatically getting the IP address.
IP Address
0.0.0.0
Sets the IP Address, Subnet Mask and
Gateway.
Note: These settings are not available if DHCP switch
is turned on.
Subnet Mask
0.0.0.0
Gateway
0.0.0.0
MAC Address
/
To Next Page
Loading...
