8 - 1
8 Infusion Modes
The pump provide the following infusion modes:
■ Rate Mode
■ Dose Mode
■ Loading Dose Mode
■ Micro-infusion Mode
■ Time Mode
■ Sequential Mode
■ Intermittent Mode
■ Dose Time Mode
■ Ramp Mode
8.1 Rate Mode/Time Mode
In rate mode and time mode, the IV drug therapy continues to infuse at a set rate.
Rate mode and time mode offers three parameters: rate, time and VTBI. When two of
these parameters are entered, the third is calculated.
• The above diagram is also applicable for Dose Mode, Micro-infusion Mode
and Dose Time Mode.
• When infusing in the rate mode and time mode, you must set rate, but time
and VTBI settings are optional.