4 - 2
not working properly, or if it is mechanically damaged. Contact your service
personnel or us.
• Stay within 1 meter (39 inches) of the pump while setting it up and operating
it, making sure that you have a clear view of the pump interface.
• The equipment uses a mains plug as isolation means to the mains power. Do
not locate the equipment in a place difficult to operate the mains plug.
4.3 Loading the Syringe
1. Pull the door (1) open, and pull down the syringe clamp (2).
2. Place the syringe into the syringe slot (3), ensuring that the barrel flange (4) is in
the space between the pump and the flange retainer (5)
.
To Next Page
Loading...
