Mindray BeneFusion eSP Vet - Performing Day’s Prescription; Configuring Pumps in Batches through the Dock

5 - 3
CAUTION
• Removing a relay pump from the Dock cancels the relay infusion.
• For a circular relay, initiating a middle pump cancels the relay. For a
customized relay, initiating a middle pump removes the pumps before it
from the relay.
5.3 Performing Day’s Prescription
The pump automatically receives the prescription from the BeneFusion eDS Vet
Veterinary Infusion Supervision System when the system is in proper network
connection. To perform the prescription, follow this procedure:
1. Swipe the touchscreen from top down→ select Menu → select Day's
Prescription.
2. Select the desired prescription, and select OK.
3. Set infusion parameters in the main screen.
4. Select to start the infusion.
5.4 Configuring Pumps in Batches through the Dock
When pumps are connected to the BeneFusion eDS Vet Veterinary Infusion Supervision
System, you can configure all the pumps in batches through the Dock. For details, see
BeneFusion eDS Vet Veterinary Infusion Supervision System Operator's Manual.