Mindray iMEC8 Vet - Understanding the Temp Display; Setting the Temperature Unit

13-2
13.4 Understanding the Temp Display
Temperature monitoring is displayed on the monitor as three numerics: T1, T2 and TD. By selecting this area, you can
enter the [Alarm Setup] menu.
1. TEMP label: Selecting this label opens the [Temp Setup] menu.
2. Temperature unit: ºC or ºF.
3. T1: Temperature channel 1. Displays the temperature measured at temperature channel 1.
4. T2: Temperature channel 2. Displays the temperature measured at temperature channel 2.
5. TD: Temperature difference, namely the difference between temperature 1 and temperature 2.
13.5 Setting the Temperature Unit
Select [Unit Setup >>] from the [User Maintenance] menu. In the popup menu, select [Temp Unit] and toggle
between [ºC] and [ºF]
1
2
3
4
5