Mindray iMEC8 Vet - Using the On-Screen Keyboard; Using the Timer

3-5
3.7 Using the On-screen Keyboard
The onscreen keyboard enables you to enter information.
 Use the
key to delete the previously entered character.
 Use the
key to toggle between uppercase and lowercase letters.
 Select the
key to confirm what you have entered and close the onscreen keyboard.
 Select the
to access the symbol keyboard.
 Select the
to exit the symbol keyboard.
3.8 Using the Timer
To display the timer in the main screen, follow this procedure:
1. Select [Main Menu]→[Screen Setup>>]→[Screen Layout >>] to access the [Screens] window.
2. Select [Screen Setup] tab.
3. In Area C, select [Timer] from the drop-down list of the desired parameter area. Refer to 3.6 Setting the Screen
for Area C.
4. Select to exit the window. The main screen will display the timer.
 Select [Start] or [Pause] to start or pause the timing.
 Select [Clear] to clear current timing result.
 Select [Setup] to access the [Timer Setup] window, in which you can set the [Direction] to [Up] or [Down]. If you
select [Down], you should set:
 [Run Time(h:min:s)]: The available time range is 0 to 100 hours, and the default time is 5 minutes.
 [Reminder Vol]: During the last 10 seconds of the countdown, the system issues a reminder tone. The
available volume range is 0 to 10. 0 means off, and 10 is the maximum volume.