18-1
18 Calculations
18.1 Introduction
The calculation feature is available with your monitor. The calculated values, which are not directly measured, are
computed based on the values you provide.
Your can perform the following calculations:
Dose calculations
Oxygenation calculations
Ventilation calculations
Hemodynamic calculations
Renal calculations
To perform a calculation, select [Main Menu] → [Calc >>], or the [Calculations] QuickKey and then select the
calculation you want to perform.
The calculation feature is independent of other monitoring functions and can be therefore used for patients
being monitored by other monitors. Any operation in a calculation window does not affect the monitoring
by the local monitor.
WARNING
After the calculation is finished, verify the entered values are correct and the calculated values are
appropriate. We assume no responsibility for any consequences caused by wrong entries and improper
operations.
18.2 Dose Calculations
18.2.1 Performing Calculations
To perform a dose calculation:
1. Select [Main Menu]→[Calculations >>]→[Dose >>], or select [Calculations] QuickKey→[Dose >>].
2. Select, in turn, [Patient Cat.] and [Drug Name] and then select the appropriate settings. The dose calculation
program has a library of commonly used drugs, of which Drug A through Drug E are for those not specified in this
library.
Drug A, B, C, D, E
Aminophylline
Dobutamine
Isuprel
Lidocaine
Nipride
To Next Page
Loading...
Need help?
General
