2-3
2.2.2 Connectors for Peripheral Devices
On the back of the patient monitor you will find all connectors for peripheral devices.
1. Network Connector: It is a RJ45 connector used to connect an ethernet network or a
PC.
2. Video Connector: It connects a standard VGA color monitor, which extends the
display capability of the monitor.
3. Auxiliary Output: It is a standard BNC connector, through which analog signals, alarm
signals or synchronization signals can be outputted, depending on how the monitor is
configured.
4. Connector for future extension
5. USB Connectors: They connect external storage devices.
6. AC Power Connector: used to connect an AC power source (100 to 240 VAC,
50/60Hz).
7. Equipotential Terminal: used to connect the equipotential terminal of other equipment,
eliminating potential difference between different pieces of equipment.
1
2
3
4
6
7
5
To Next Page
Loading...
