5-10
5.5.2 Removing the CF/Wireless AP Assembly, CF Assembly
or CF slot blank cover
1. To take out the CF/Wireless AP assembly (if installed), unplug their cables from the
power management and interface board. Then unscrew the two M3×6 screws.
2. To take out the CF assembly (if installed), unplug the cable from the power
management and interface board. Then unscrew the two M3×6 screws.
3. To take out the CF slot blank cover (if installed), unscrew the two M3×6 screws.
To Next Page
Loading...
