Mindray MX7 User Manual

6 - 36 Operator’s Manual
6 Image Acquisition
2. Select [Probe] > [QSave] or press the user-defined key for “QSave” to enter the QSave dialog
box.
3. Click [Show Parameter] to view the image parameter of the current exam mode and the probe.
4. Click [Advanced] to set the following items if needed:
– Set the value to TIC/TIB/TIS.
– Enable the M-mark line.
The M-mark line always appears after being set when entering PW/M/TVM mode for
once. Press <PW>/<M> to enter the corresponding mode one time.
This function is unavailable for frozen dual-probe mode.
5. To save image parameters:
– Click [Save] to save the current image values for the current exam mode of the certain
probe.
– Click [Create] to save the current image parameters, measurements, comments, body
mark settings to the exam mode. The system will ask for a new name of the exam.
– Click [Restore] to restore the probe and exam mode to factory settings.

Mindray MX7 Specifications

General

Display Size	15.6 inches
Transducer Ports	3
Portability	Portable
Type	Ultrasound System
Display Type	LCD
Battery Life	120 min
Imaging Modes	B, M, Color Doppler, Power Doppler, Pulsed Wave Doppler
Connectivity	Wi-Fi, Ethernet, USB
Applications	Vascular, Cardiology, OB/GYN, Urology
Probe Connectors	3
Operating System	Windows