2 System Overview
Operator’s Manual 2 - 23
2.15 Warning Labels
The warning labels are attached to this system in order to call your attention to potential hazards.
The warning labels use the same signal words as those used in the operator’s manual.Read
operator’s manual carefully before using the system.
The name, pattern and meaning of each warning label are described as follows:
2.16 Symbols
This system uses the symbols listed in the following table. Their meanings are explained as follows:
No. Description
1. Click to speak to the microphone (the system recognizes the vocal order). The
system conducts the operations after recognizing the voice.
2. Click to stop the voice Recognition.
3. Click to open the help information.
No. Warning Labels Meaning
1. Read this information carefully before using the
system.
2. The following labels are
available when the system works
with the mobile trolley.
1. Do not place the system with the mobile trolley
on a sloped surface. Otherwise the system may
slide, resulting in personal injury or the system
malfunction. Two persons are required to move
the system over a sloped surface.
2. DO NOT sit on the trolley.
3. When the casters are locked, DO NOT push the
trolley.
3. Non-ionizing radiation
Symbol Description
Type-BF applied part
To Next Page
Loading...
Need help?
General
