MP 26 Transmitter Installation and Calibration Manual
Minebea Intec
3.5. Configuration Levels
There are 3 configuration levels/modes available for the MP 26:
1. Normal Mode: displays the weight value along with its unit
2. Installation Mode: enables user to calibrate the system
3. Parameter Mode: enables user to set limit values & input values.
4. Configuration Mode: enables user to switch ON various functionalities and their
associated settings
5. End: enables user to save and exit the operating levels
3.6. Calibration
Calibration of the scale must be followed by initial setting. After entering the prerequisites in
the initial setting, the instrument can be calibrated for the given weight or value. Calibration
can be carried out in two ways: one method is to use the MP26/10 tool and download the
settings to the device. The other method is to use the device and its keys. Please refer to
Chapter 4 for more details.
To Next Page
Loading...
