Minebea Intec MP 26 - 7.7. General

MP 26 Transmitter Installation and Calibration Manual
Minebea Intec
EN-49
7.7. General
7.7.1. Housing front
Material:
Polyamide PA 6.6
Flammability class:
VO (UL 94)
7.7.2. Connecting terminals
Material:
Polyamide PA
Flammability class:
V2 (UL 94) for screw terminals
7.7.3. Electrical safety
Complies with EN 61 010-1
Over-voltage category II
Contamination degree 2
operating voltage range 300 V
Protection class II
7.7.4. Certifications
CE certified
7.7.5. Electrical connections
Plug-in connector strips with choice of terminal type:
Screw terminals for lead cross-sections from 0.2 to 2.5 mm
2
.
7.7.6. Mounting method
Clip-on rail mounting (35 mm top-hat rail to EN 50 022).
Locked by means of metal catch in housing base.
Close-packed mounting possible.
Mounting position:
vertical
Weight:
0.18 kg