miniClima Schönbauer GmbH
Brunner Str. 21b, 2700 WIENER NEUSTADT, AUSTRIA, EU
Tel. | Phone: +43 2622 24964, +43 6991 24964 01, Voicemail: +43 6993 24964 01, Fax: +43 2622 24964 15, E-Mail: office@miniclima.com
www.miniclima.com, twitter.com/miniClima, www.linkedin.com/company/miniclima-schönbauer-gmbh, www.google.com/+Miniclima, www.facebook.com/miniclima
UID | VAT-ID: ATU61994435, EORI: ATEOS1000001229, DVR: 4008782
Firmenbuchnummer | Trade Register Number: 267137z (Landesgericht | Regional Court of Wiener Neustadt)
2) Pull the old chip off
13
:
3) Push the new chip cautiously onto the socket. IMPORTANT: Note the markings for the correct polarity -
a white dot on both the chip and socket. The two white dots have to be on the same position and side
(see the blue circles in the picture below):
4) Screw the plastic part of the housing back on:
5) Once done, you can set your EBC back to work.
13
Please do put the old chip in a padded envelope (along with your contact data, the S/N and/or type number of your EBC, as well as with a brief description of the reason for the
exchange) and return it to our address.
Applies analogously to the individual products of series EBC10/11/12 (Rev.3). As of 24.11.2014. Subject
to modification.
miniClima - Manual_EBC10-11-12(Rev.3)_en
48 / 54
To Next Page
Loading...