Mircom FX-2000

Mechanical Installation and Dimensions
6
Mechanical Installation and Dimensions
Install the enclosure as shown for the BBX-1024 in Figure 1 below, or for the BBX-1072A see Figure 2 on the
following page.
Figure 1: BBX-1024 Flush or Surface Enclosure Installation and Dimensions
Note: Leave bottom of box conduit free for batteries.
FA-UNIV-TRB
Adhere trim ring to
wall surface around
backbox.
17.0"
28.5"
1.2"
1.2"
14.55"
3.7"
1.55"
18"
1.55
0.2"
0.2"
Material: 18GA (0.048”) thick cold rolled steel
Finish: Painted except for hinges
FA-UNIV-TRB