Mircom QX-mini Programming Guide

64
Relay Input - QX-mini and FX-3500
Note: Signal silence cannot be performed via the relay input connection; this
feature is only available through an SLC connection with a Mircom
panel using addressable modules.
9. Create zones as per requirement and correlate them to NACs and speaker outputs.
Figure 92 Create zones
10. Click on “Edit Audio”.
Figure 93 Edit Audio button
11. Click “Add” and create a message. Ensure that stage for Evac is selected from the drop
down.
Figure 94 Audio Clips

Mircom QX-mini Specifications

General

Brand	Mircom
Model	QX-mini
Category	Security System
Language	English