Mitel 700 - Page 68

Mitel 700 DECT Phone User Guide
60
Sensibility Allows you to set the sensitivity (low, medium, high). This
allows you to adapt the sensor to the different movements (e.g.
running movement) of the surveillance personnel:
• Low sensibility means: Slow movements are enough to
reset the delay once again.
• High sensibility means: Only rapid (jolting) movements will
reset the delay.
Switch Vibra call off in the Ringer settings (see “Profiles menu” on page 61) if you wish
to use the escape alarm.
Repeat alarm
Use Change to switch the repetition of an alarm on and off
Repeat time
The amount of time after which a new pre-alarm is made,
followed by the dialling of the alarm call number, for instance
because the dialling of the alarm call number was cancelled
(5-240 seconds).
Reset to default
You can reset different areas your settings to the status they had on delivery.
Personal directory You can delete your phone book entries after a confirmation
prompt.
VIP list Deletes the VIP list (see “VIP list (Mitel 712dt)” on page 28).
Call filter All call filter settings are deleted after a confirmation prompt.
Inbox/ Text messages If Text messages are available on your system, you can delete
the Inbox list before you have marked all the messages as
“read”. This is not possible in the Inbox list.
New info Deletes the list with new information.
All lists
All lists (call lists, redial list) are deleted after a confirmation
prompt.
Key programming
All programmed keys are reset to their factory settings.
Bluetooth All bluetooth settings are deleted after a confirmation prompt.
Audio/Profiles All audio/profiles are deleted after a confirmation prompt.
User settings
All the user settings (e.g. language, display settings) are rest
to the factory settings after a confirmation prompt.
Jobs
If Text messages are available on your system, your can
delete the Jobs list before you have marked all of the
messages as “read”. This is not possible in the Jobs list.
All
All settings on the handset are reset to factory settings after a
confirmation prompt. The registration of the handset on the
system and the PIN are not affected.