Mitsubishi Electric CR800-D Series - Parameter; Setting Parameters (Consumption Degree) Continued

Parameter 162
Parameter
Parameter
name
Number of
elements
Details explanation
Factory
setting
Attribute
*1)
Notification
method of
maintenance
part
consumption
PMRPTMNT
Integer 2
Specify the notification method of the
predictive/preventive maintenance
function. (Maintenance part
consumption)
Specify the behavior when the warning
occurrence detection level by the
predictive/preventive maintenance
function exceeded the remaining time
(remaining recommended maintenance
time) of the maintenance parts.
Element 1: Issues warning/does not
issue warning (1/0)
Element 2: Outputs/does not output
dedicated signals (1/0)
0, 0
R/W
Notification
method of
overhaul part
consumption
PMRPTOH
Integer 2
Specify the notification method of the
predictive/preventive maintenance
function. (Overhaul part consumption)
Specify the behavior when the warning
occurrence detection level by the
predictive/preventive maintenance
function exceeded the remaining time
(remaining recommended maintenance
time) of the part requiring overhaul.
Element 1: Issues warning/does not
issue warning (1/0)
Element 2: Outputs/does not output
dedicated signals (1/0)
0, 0
R/W