Maintenance 86
11.3.2. Restore (personal computer robot)
Transfer the information backed up on the personal computer to the robot controller.
To restore predictive maintenance information, from the folder selection dialog box, select the folder you
wish to restore.
If there is missing backup data, an error message is displayed and restore is interrupted.
The following describes how to restore predictive maintenance information.
Restore predictive maintenance information.
1) Start predictive maintenance.
2) Click [Maintenance] - [Backup].
3) When "Restore" is clicked on the main screen, the "Select Backup Folder" appears.
4) Use the "Browse" button to specify the location of the backup folder.
5) The backup folder is displayed on the screen; select the folders you wish to restore and then press
the [OK] button.
6) From the tree on the left side, when you select Total Score, Abnormality Detection, Consumption
Degree, or other predictive maintenance functions, the restored information is displayed on the
main screen.
Restored maintenance information
To Next Page
Loading...
