Maintenance 87
11.4. Maintenance Log
Display the recorded maintenance log.
11.4.1. Maintenance Log screen
The predictive maintenance function stores 10 maintenance log items of the past.
Upon executing maintenance reset, item, date & time, consumption degree [%] and accumulation count
are recorded.
On the Maintenance Log screen, the recorded log is displayed.
Log targets: Grease, timing belt, reduction gear, bearing, ball screw, overhaul
1) Select Parts
Select items for which a log is displayed.
(All, Grease, Timing Belt, Gear, Bearing, Ball Screw, Overhaul)
2) Component
Items selected in the Select Parts field are displayed. A maximum of 10 log items are displayed
for each axis.
3) Axis Number
Displays the target axes. Displays "-" for overhaul.
4) Date
Displays the reset date & time.
5) Consumption degree
Displays consumption degree [%] at the time of reset.
To Next Page
Loading...
