Maintenance 80
11. Maintenance
On the maintenance screen, you can reset the consumption degree, or can specify backup/restore and
pausing of warning occurrence/warning signal output during maintenance. In addition, you can check the
maintenance log.
1) Warning Pause : Displays the warning occurred/list of warning signals being output.
Specify pausing of notifications (alarm, dedicated output signal).
2) Maintenance Reset : Resets (clears) the accumulation data related to consumption degree and
score.
3) Backup : Performs backup/restore when migrating the predictive maintenance data to
a different controller.
4) Maintenance Log : Displays the maintenance log recorded during executing maintenance reset.
1) Start predictive maintenance.
2) Click [Maintenance] to expand the menu; the maintenance functions are displayed.
3) Click [Warning Pause], [Maintenance Reset], [Backup], or [Maintenance Log], to switch the main
screen.
Example: Maintenance Reset screen
(1) Warning Pause
(2) Maintenance Reset
(3) Backup
(4) Maintenance Log
To Next Page
Loading...
