Parameter 168
Operating information
(integration time,
accumulation count) total
accumulated data reset
Resets total accumulated data related to the
operating information (integration time,
accumulation count) of the
predictive/preventive maintenance function.
(Used at the time of overhaul.)
In order to prevent mis-operation, the value
upon reading is [-1] (out of setting range).
C.7081(04000) : Out of
range
C.7081(03000) : Other
than numeric value
Consumption degree,
operating information
(integration time,
accumulation count) total
accumulated data reset
Resets total accumulated data related to the
consumption degree and operating
information (integration time, accumulation
count) of the predictive/preventive
maintenance function. (Used at the time of
mechanism replacement.)
* The meaning of reading and writing is the
same as that of overhaul (RSTPMOH).
<Pausing warning occurrence/signal output>
Consumption degree
(grease) of each joint axis
Specifying pause of
warning
occurrence/warning
signal output
Specifies pause of warning
occurrence/warning signal output of the
consumption degree (grease) of each joint
axis.
The
predictive/prev
entive
maintenance
function is
disabled
C.7081(04000) :
Out of range
C.7081(04000) :
Out of range
C.7081(03000) :
Other than
numeric value
Consumption degree
(timing belt)
Specifying pause of
warning
occurrence/warning
signal output
Specifies pause of warning
occurrence/warning signal output of the
consumption degree (timing belt) of each
joint axis.
* The meaning of reading and writing is the
same as that of grease (RPTPMGRS).