Mitsubishi Electric CR800-D Series - Dedicated Input;Output Signals; Dedicated Warning Output Signals

Dedicated input/output signals 179
Parameter
name
Category
Function
Signal
level
Signal number at factory
default
CR800-R/Q
CR800-D
PMSIGGRS
Input
−
−
-1 (No
meaning),
-1 (No
meaning),
Output
Maintenance warning of predictive/preventive
maintenance
(grease)
Outputs the effect that the remaining time (remaining
recommended maintenance time) of the grease
exceeded the warning occurrence detection level.
−
-1
-1
PMSIGBLT
Input
−
−
-1 (No
meaning),
-1 (No
meaning),
Output
Maintenance warning of predictive/preventive
maintenance
(timing belt)
Outputs the effect that the remaining time (remaining
recommended maintenance time) of the timing belt
exceeded the warning occurrence detection level.
−
-1
-1
PMSIGDEC
Input
−
−
-1 (No
meaning),
-1 (No
meaning),
Output
Maintenance warning of predictive/preventive
maintenance
(decelerator)
Outputs the effect that the remaining time (remaining
recommended maintenance time) of the reduction
gear exceeded the warning occurrence detection
level.
−
-1
-1
PMSIGBRG
Input
−
−
-1 (No
meaning),
-1 (No
meaning),
Output
Maintenance warning of predictive/preventive
maintenance
(bearing)
Outputs the effect that the remaining time (remaining
recommended maintenance time) of the bearing
exceeded the warning occurrence detection level.
−
-1
-1
PMSIGBSS
Input
−
−
-1 (No
meaning),
-1 (No
meaning),
Output
Maintenance warning of predictive/preventive
maintenance
(ball screw/ball spline)
Outputs the effect that the remaining time (remaining
recommended maintenance time) of the ball
screw/ball spline exceeded the warning occurrence
detection level.
−
-1
-1
PMSIGSRV
Input
−
−
-1 (No
meaning),
-1 (No
meaning),
Output
Maintenance warning of predictive/preventive
maintenance
(servo on time)
Outputs that the servo ON time reached the overhaul
implementation time.
−
-1
-1