EasyManua.ls Logo

Mitsubishi Electric CR800-D Series - Introduction; Manual Notation and Symbols

Mitsubishi Electric CR800-D Series
194 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Introduction
Thank you for purchasing the Mitsubishi industrial robot "MELFA Smart Plus Card/Card Pack Option".
This instruction manual explains the " Predictive Maintenance Function" that can be used with the MELFA
Smart Plus Card/Card Pack Option.
This product provides features that support maintenance and inspection so that the robot can be used for a
long time without trouble.
Efficient maintenance is supported though early detection of abnormalities or deterioration of robot
components and notification of the time of maintenance parts replacement or overhaul based on theactual
operating status of the robot.
Furthermore, due to the feature of estimating the parts replacement time or the recommended maintenance
time, this function can be used for decision making on the maintenance cycle.
To ensure correct usage of the product, always read through this manual before starting to use
"Predictive maintenance function".
For details of basic robot operation, refer to the separate "Instruction Manual / Detailed Explanations of
Functions and Operations".
■ Notation used in this manual
Caution
Warning
Danger
This indicates an item for which incorrect handling could present
imminent danger of death or serious injury.
This indicates an item for which incorrect handling could present a
danger of death or serious injury.
This indicates an item for which incorrect handling could present a
danger of injury. It could also present a danger of just physical damage.
No part of this manual may be reproduced by any means or in any form, without prior consent from
Mitsubishi.
The details of this manual are subject to change without notice.
The specification value is based on our standard test method.
An effort has been made to make full descriptions in this manual. However, if any discrepancies or
unclear points are found, please contact your dealer.
This specifications is original.
Company names and product names described in this document are trademarks or registered
trademarks of each company.
R
and TM are omitted in the text of this guide.
Copyright(C) 2019 MITSUBISHI ELECTRIC CORPORATION ALL RIGHTS RESERVED

Table of Contents

Other manuals for Mitsubishi Electric CR800-D Series

Related product manuals