Mitsubishi Electric MELSEC-L Series LD40PD01 - Page 223

13 PROGRAMMING
13.3 When the Module Is Connected to a Head Module
221
13
Setting on the intelligent device station side
1. Create a project of GX Works2.
Select "LCPU" in "Series" and select "LJ72GF15-T2" in "Type".
[Project]  [New]
2. Display the setting window for the PLC parameters and set the values as follows.
[Project window]  [Parameter]  [PLC Parameter]  "Communication Head Setting"
3. Add the flexible high-speed I/O control module (LD40PD01) to the project of GX Works2.
[Project window]  [Intelligent Function Module]  Right-click  [New Module]